Electrical
When it comes to Solar Power DEFCON Underground Mfg. has you covered. We only use high quality Solar Systems, Solar Panels, Batteries and Mounting hardware. When outfitting your Underground Bunker, Survival Shelter or Storm Shelter make sure you are using quality components that will not fail when they are needed. When choosing a company to work with, make sure you know exactly what you are getting. Some companies will say they include a solar system but do not say exactly what you are getting. At DEFCON Underground we build a system that is designed for your specific needs. We will work with you to calculate your power draw need. We will then figure out how many batteries you need for storage and how big of an inverter you need to power your fixtures and appliances. We will also list exactly what parts you are getting when you order you bunker. Below is a list of common components that we use in most of our Underground Bunkers, Survival Shelters and Storm Shelters.
Square D Power Pannel and Breakers
The Square D by Schneider Electric Homeline Value Pack 100 Amp Indoor Convertible Main Breaker Load Center for Plug-on Neutral breakers includes the cover, a selection of breakers and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and is compatible with Square D Homeline circuit breakers. Square D Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline breaker boxes are engineered for fast installation and wire savings.
- Includes a fully distributed neutral bar, allowing for the installation of Homeline plug-on neutral combination arc fault breakers on any space
- Each pole space is compatible with a Square D Homeline full-size, tandem or quad breakers
- Ground and neutral bars accept up to (3) #10-14 equipment grounds
- Accommodates plug-on secondary surge arrestor (sold separately)
- Overhead/underground feed simply by rotating the device before installing
- Single phase, Indoor Main Breaker Homeline Breaker Box
- Rated 120/240 VAC and 22,000 AIR short circuit current rating
- Automatic flush adjusting cover requires less time to complete the job
- Designed with straight-in mains to save expensive cable and time
- Distributed split branch neutral with terminal screws backed out offering with up to 50% more terminals than UL requires increases wiring flexibility saving installation time and simplifies wiring
- Thermoplastic interior assembly is among the most rugged in the industry
- Slot/square drive screws let you use either standard flat blade screwdriver or square-head driver for positive drive and proper torque
- For protection from damage or theft on the job site, interiors can be easily removed with a single captive screw
- 3-ground bar mounting locations (left, right and end) let you pick the easiest spot to wire
- Made in the USA
The Square D by Schneider Electric Homeline One-Pole Circuit Breaker is used for overload and short-circuit protection of your electrical system. This breaker is compatible with Homeline load centers and CSED devices. The ANSI-certified and UL-Listed unit is rated for 120/240 VAC and 10,000 AIR. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class. Homeline circuit breakers are the best in class. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.
- Plug-In design, easy to install
- Switching duty rating (SWD) for one-pole breakers
- Compatible with Homeline load centers and CSED devices
- 120/240-Volt AC
- 10,000 AIR
- Limited lifetime warranty
Plasti-Bond Ridgid PVC Coated Conduit
PVC-coated galvanized rigid conduit with red urethane interior coating protects conductors from mechanical damage and corrosive attack. Electrical continuity is maintained across assembled joints.
HOT GALVANIZED THREADS After machining of conduit threads to exacting tolerances, Plasti-Bond conduit threads are further enhanced utilizing a specialized hot galvanizing process that protects the threads. Plasti-Bond threads are coated with a clear polyurethane spray to provide additional corrosion protection. This process allows for zinc to be evenly applied to the threads, keeping zinc from pooling in between threads. In addition, threads are not over-exposed to molten zinc. This prevents threads from becoming brittle.
Features
40 mil gray PVC exterior coating
2 mil red urethane interior coating
A clear urethane coating over hot galvanized threads
Available in 12 trade sizes, 1/2" through 6"
Shipped in 10' lengths with coupling
Color-coded thread protector caps for quick identification of conduit size
General Information
Material
STEEL
Exterior Finish
A nominal .040 inch (40 mil) gray PVC coating
Interior Finish
A nominal .002 inch (2 mil) red urethane
Thread Finish
A clear urethane coating over Hot Galvanized Steel
Plasti-Bond Ridgid PVC Coated Coupling
DESCRIPTION PVC-Coated SpeedCouple is used to quickly and easily install PVC-coated rigid conduit and elbows. Rated for direct burial and ideal for tight space applications, PVC-Coated SpeedCouple allows you to complete connections without having to turn the conduit or elbows.
FEATURES
- Trade sizes 2” through 6”
- 40 mil gray PVC exterior coating, urethane interior coating
- Sealing Sleeves on both ends
- Stainless Steel Locking Screw
- Lead-in threads facilitate threading & ground continuity
- Concrete tight
- Suitable for direct burial
- NPT Threads
STANDARDS
- UL 514B (E200413)
- CSA C22.2 No. 18.3-12
Plasti-Bond Ridgid PVC Coated 90 Degree Fitting
Plasti-Bond REDH2OT factory-bent standard radius elbows are available and ready to ship. Factory-bent elbows are more accurate, quicker to install, and more economical because they save field bending time and do not waste materials. Electrical continuity is maintained across assembled joints.
FEATURES
- 40 mil gray PVC exterior coating
- 2 mil red urethane interior coating
- 12 trade sizes from 1/2” through 6”
- Available in standard sizes 90˚, 60˚, 45˚, 30˚, and 221/2˚ bends
- Plastic thread protector caps are color coded for quick identification of conduit size
STANDARDS
Steel and Aluminum
- UL 6 (E2314); UL 6A (E98405)
- CSA C22.2 No. 45
Plasti-Bond Ridgid PVC Sealer
Plasti-Bond REDH2OT Touch-up Compounds are available to repair minor damage to the interior urethane or exterior PVC factory coatings. The exterior PVC touch-up compound is gray and available in a 12 oz. aerosol can and a pint can with brush-top applicator. The approved thread compound is available in a pint can with a brush-top applicator.
The PVC Coating Repair Kit is a UL recognized two-part epoxy capable of bonding to PVC and steel or aluminum substrates. It includes all necessary tools in order to repair the damaged area and is dark gray in color.
Sol-Ark SA-5K Pre-wired Hybrid Inverter System
Sol-Ark 5K Pre-Wired Hybrid Inverter System is a all-in-one system that includes an inverter, charger controller, a display with remote monitoring. The Sol-Ark is simple to install to a Grid-tied, Off-Grid, or Battery Backup solar system, while being able to manages power to and from Solar, Battery, Grid, Loads, and Generator.
SA-5K Features:
- Simple to install with touchscreen interface
- Grid Tied Mode: Sell your power to reduce electric bill
- Meter Zero Mode: Zero your electric bill without a smart meter
- Time of Use: Use solar and batteries to minimize grid power usage
- Programmable Smart Load Mode
- DC and AC Coupling
- Works with a wide range of battery chemistries - Lead acid to Lithium
SA-5K Specifications:
- AC Voltage: 120/240V split phase
- AC Frequency: 60/50 Hz
- Max PV power delivered to Battery & AC outputs: 6500 Watts
- Max AC Coupled input(Micro/String Inverters): 9,600 Watt/9,600 Watt
- MPPT Voltage Range: 150-425V
- Max DC Current: 10 Amp (per mppt)
- Inverter Efficiency: 96.0%
- Listings & Certifications: UL1741-2010/2018, IEEE1547a-2003/2014, FCC 15 class B
- Weight: 78. lbs
- Dimensions (H x W x D): 30.0" x 18.30" x 10.00"
5 Year Standard Warranty
Sol-Ark SA-8K Hybrid Inverter System
Sol-Ark 8K Pre-Wired Hybrid Inverter System is a all-in-one system that includes an inverter, charger controller, a display with remote monitoring. The Sol-Ark is simple to install to a Grid-tied, Off-Grid, or Battery Backup solar system, while being able to manages power to and from Solar, Battery, Grid, Loads, and Generator.
SA-8K Features:
- Simple to install with touchscreen interface
- Grid Tied Mode: Sell your power to reduce electric bill
- Meter Zero Mode: Zero your electric bill without a smart meter
- Time of Use: Use solar and batteries to minimize grid power usage
- Programmable Smart Load Mode
- DC and AC Coupling
- Works with a wide range of battery chemistries- Lead acid to Lithium
SA-8K Specifications:
- AC Voltage: 120/240V split phase
- AC Frequency: 60/50 Hz
- Max Continuous AC Output Power: 12,000W
- MPPT Voltage Range: 150-425V
- Max Input Current: 18 Amp (per mppt)
- Inverter Efficiency: 96.0%
- Listings & Certifications:UL1741-2010/2018, IEEE1547a-2003/2014, FCC 15 class B
- Weight: 75. lbs
- Dimensions (H x W x D): 30.0" x 18.30" x 10.0"
5 Year Standard Warranty
Sol-Ark SA-12K Hybrid All-in-One
Sol-Ark 12K Pre-Wired Hybrid Inverter System is a all-in-one system that includes an inverter, charger controller, a display with remote monitoring. The Sol-Ark is simple to install to a Grid-tied, Off-Grid, or Battery Backup solar system, while being able to manages power to and from Solar, Battery, Grid, Loads, and Generator.
SA-12K Features:
- Simple to install with touchscreen interface
- Grid Tied Mode: Sell your power to reduce electric bill
- Meter Zero Mode: Zero your electric bill without a smart meter
- Time of Use: Use solar and batteries to minimize grid power usage
- Programmable Smart Load Mode
- DC and AC Coupling
- Works with a wide range of battery chemistries- Lead acid to Lithium
SA-12K Specifications:
- AC Voltage: 120/240V split phase
- AC Frequency: 60/50 Hz
- Max Continuous AC Output Power:12,000W
- MPPT Voltage Range: 150-425V
- Max Input Current: 18Amp (per mppt)
- Inverter Efficiency: 96.0%
- Listings & Certifications:UL1741-2010/2018, IEEE1547a-2003/2014, FCC 15 class B
- Weight: 77. lbs
- Dimensions (H x W x D): 30.0" x 18.30" x 10.00"
10 Year Standard Warranty
goes here...
Outback Power FLEXpower FP1 FXR2524A-01 Pre-Wired Inverter System
The Outback FLEXpower system comes fully assembled and tested from the Outback factory. The units are built to meet National Electric Code (NEC) standards and designed for ease of installation. FLEXpower FXR systems can be used for both off-grid and grid-tie configurations. The systems have been outfitted with all the necessary wiring, circuit breakers, communications, battery monitoring and PV ground fault protection. All equipment is ETL listed. The FLEXpower ONE FX-R Series is perfect for nearly any type of application: residential and commercial applications including cabins, vacation homes, farm buildings, remote communications sites and back-up power systems, with all necessary components integrated into a compact hang-on-the-wall system with a minimal footprint. The FLEXpower systems are designed for fast installation which cuts down on time and cost. The system comes with a mounting bracket that attaches to your wall, which then allows you to hang the FLEXpower system. This allows you to get up and running very quickly; simply connect the PV input, AC output, and battery connection.
Specifications:
- 2,500 Watts
- 24 Volts DC
- FXR2524A-01 Pure Sine Wave Inverter with Advanced Charging
- 175 Amp DC Inverter Breaker/Disconnect
- MATE3 System Controller and Display
- FLEXnet DC Battery Monitor
- FLEXmax 80 Amp Charge Controller With Remote Temp. Sensor
- HUB 10.3 Communications Manager
- FLEXware Surge Protector
- One Standard Electrical Outlet
- 120VAC Bypass Assembly
- AC and DC Electrical Enclosures
- Mounting Plate and Mounting Bracket
Warranty: 5 Years
Outback Power FLEXpower FP1 FXR3048A Pre-Wired Inverter System
The Outback FLEXpower system comes fully assembled and tested from the Outback factory. The units are built to meet National Electric Code (NEC) standards and designed for ease of installation. FLEXpower FXR systems can be used for both off-grid and grid-tie configurations. The systems have been outfitted with all the necessary wiring, circuit breakers, communications, battery monitoring and PV ground fault protection. All equipment is ETL listed. The FLEXpower ONE FX-R Series is perfect for nearly any type of application: residential and commercial applications including cabins, vacation homes, farm buildings, remote communications sites and back-up power systems, with all necessary components integrated into a compact hang-on-the-wall system with a minimal footprint. The FLEXpower systems are designed for fast installation which cuts down on time and cost. The system comes with a mounting bracket that attaches to your wall, which then allows you to hang the FLEXpower system. This allows you to get up and running very quickly; simply connect the PV input, AC output, and battery connection.
Specifications:
- 3,000 Watts
- 48 Volts DC
- FXR3048A-01 Pure Sine Wave Inverter with Advanced Charging
- 175 Amp DC Inverter Breaker/Disconnect
- MATE3 System Controller and Display
- FLEXnet DC Battery Monitor
- FLEXmax 80 Amp Charge Controller With Remote Temp. Sensor
- HUB 10.3 Communications Manager
- FLEXware Surge Protector
- One Standard Electrical Outlet
- 120VAC Bypass Assembly
- AC and DC Electrical Enclosures
- Mounting Plate and Mounting Bracket
Warranty: 5 Years
REC Solar 330 Watt N-PEAK Monocrystalline Module
The REC N-Peak Series are premium n-type mono solar panels using REC’s proven half-cut cell technology. The panel features the innovative REC ‘Twin’ cell layout design, where the panel is split into two twin sections, also enabling continued energy production, even when partially shaded. The REC N-Peak Series has extra support bars across the rear of the panel, greatly boosting its strength and durability, and allowing loads of up to 7000 Pa – far exceeding the 5400 offered by conventional panels. This added strength enables you to achieve much higher energy yields. Combined with a 30 mm frame height, this frame design enables flexible installation options, making overcoming every obstacle easier during system design.
With up to 330 Watts in a 60-cell panel, the REC N-Peak Series uses the most efficient cell technology in the industry, capturing more sunlight thereby providing more power. The panel features the innovative REC ‘Twin’ cell layout design, where the panel is split into two twin sections, also enabling continued energy production, even when partially shaded.
The loss of power generation capacity experienced by a standard solar panel on its first exposure to light is known as Light Induced Degradation (LID). This is a result of the combination of boron and oxygen inside a cell and causes a permanent drop in a standard panel’s maximum power.
The n-type technology in REC’s N-Peak cells stops these two elements from mixing at any level, thereby fully preventing any occurrence of LID. Thus, the panel’s power remains the same as when it left the REC factory – meaning you always get exactly the power levels that you paid for.
Industry-leading Warranty
- Subject to the terms and conditions of this Limited Warranty, REC warrants that the actual power output (performance) of the Product will reach at least 98% of the nameplate power output specified on the Product during the first year (calculated from the date of production as identified on the Product). From the second year, the actual power output will decline annually by no more than 0.5% for a period of 24 years, so that by the end of the 25th year, an actual output of at least 86% of the nameplate power output specified on the Product will be achieved.
REC330NP specifications:
- Nominal power: 330 Watts
- Number of cells: 120 half-cut
- Power tolerance: +5 / -0 Watts
- Vmp: 34.6 Volts
- Voc: 41.0 Volts
- Imp: 9.55 Amps
- Isc: 10.33 Amps
- Module efficiency: 19.8%
- Dimensions (inches): 65.9" x 39.25" x 1.1"
- Dimensions (mm): 1675 x 997 x 30
- Weight: 39.7 lbs (18 kg)
Centennial 210Ah 12 Volts AGM Deep Cycle Battery
Centennial AGM batteries are a perfect representation of stable quality and high reliability batteries. Centennial's AGM sealed construction allows for the battery to provide long life cycles. At the same time, being a maintenance-free product with a low pressure ventilation system, makes it perfect for standby applications. The ability to deliver high currents without significant drops in voltage is what makes Centennial competitively exclusive in guaranteeing customer satisfaction.
CB12-210 Specifications:
- Model number: CB12-210
- Cells per battery: 6
- Voltage: 12 Volts
- Capacity: 210 Amp-hours @ 20 hour rate to 1.75V per cell
- Max discharge current: 1,950 Amps (5 seconds)
- Internal resistance: 4.0 miliohms
- Recommended max charging current: 58.5 Amps
- Self discharge: approximately 3% per month at 25°C
- Terminal type: L6
- Weight: 135.58 pounds (61.5 kg)
- Dimensions (L x W x H): 20.87" x 8.23" x 8.43" inches. Total height with terminals: 9.41" inches
Warranty: 2 years free replacement; 5 years pro rated; 7 years total
Centennial 270Ah 12 Volts AGM Deep Cycle Battery
Centennial AGM batteries are a perfect representation of stable quality and high reliability batteries. Centennial's AGM sealed construction allows for the battery to provide long life cycles. At the same time, being a maintenance-free product with a low pressure ventilation system, makes it perfect for standby applications. The ability to deliver high currents without significant drops in voltage is what makes Centennial competitively exclusive in guaranteeing customer satisfaction.
CB12-260 Specifications:
- Model number: CB12-260
- Cells per battery: 6
- Voltage: 12 Volts
- Capacity: 270 Amp-hours @ 20 hour rate to 1.75V per cell
- Max discharge current: 2,600 Amps (5 seconds)
- Internal resistance: 3.5 megohms
- Recommended max charging current: 78 Amps
- Self discharge: approximately 3% per month at 25°C
- Terminal type: L6
- Weight: 169.75 pounds (77 kg)
- Dimensions (L x W x H): 20.47" x 10.55" x 8.66" inches. Total height with terminals: 9.65" inches
Warranty: 2 years free replacement; 5 years pro rated; 7 years total
Universal UB-4D (45965) 12V SLA AGM 200Ah Deep Cycle Battery
When you need a rugged battery that meets high quality and performance standards, while still being cost competitive, the Universal Power Group (UPG) Universal line of sealed lead-acid (SLA) batteries are perfect. Absorbed glass mat (AGM), also known as valve regulated lead-acid (VLRA), is a technology that allows the use of proven lead-acid battery technology but without the hassle of routine battery maintenance such as checking the water levels for the proper amount of electrolyte. The glass mat material absorbs and releases the excess gas and water during the charge and discharge cycles. Since the batteries are sealed, spill proof, and leak proof, they can be installed in most locations and any orientation. The Universal batteries are designed to be deep cycled, which means they will hold up better than standard batteries in applications that require frequent charging and discharging, without adversely affecting the overall performance or capacity.
Experience matters in the battery industry and UPG has perfected the business model since their beginning in 1968. UPG takes the quality of their products very seriously. They are an ISO 9001:2008 certified company that abides by very strict quality management standards. Battery inventory is rotated on a regular basis to prevent spoilage and every battery is top charged before leaving the warehouse. This ensures that your batteries will arrive healthy and ready to be installed upon delivery. The Universal line is well suited for both solar and wind power applications. When combined with a properly sized solar array or wind turbine, these batteries will give you years of energy storage at a much lower cost than the name brand alternatives. UPG promises exceptional quality, environmental responsibility, excellent value and reliability for all your renewable energy storage needs.
Specifications:
- Model number: UB-4D
- UPG number: 45965
- Nominal voltage: 12 Volts DC
- Nominal capacity at 77°F: 200 Amp-hours (Ah) at 20 hour rate
- Group Size: 4D
- Maximum charging current: 60 Amps
- Internal resistance: 4 megohms
- Terminals: L Series stud terminal lugs
- UL recognized
- Weight: 114.6 lb (52 kg)
- Dimensions (inches): 20.75"L x 8.11"W x 8.43"H; Total height: 9.65"
1 year warranty
Fullriver Battery 12 Volts 260 Amp-hours Deep Cycle AGM
Full River 12 Volt, 260 Amp hour Absorbed Glass Mat battery, Non-Spillable, AGM, Valve Regulated Lead Acid, Rechargeable Battery.
When it comes to Deep Cycle batteries, the details matter. Construction, plate chemistry, and craftsmanship all have to be in sync to get the longest life in the most demanding applications. Because of the environments where Fullriver DC AGM batteries are used, we work closely with our customers to ensure our construction standards are geared to meet your needs. We use more lead in creating stronger connections between cells, heavier plates to increase our reserve capacity, and have formulated our batteries to maximize life cycles.
By taking these steps, the engineers and factory for Fullriver DC Series batteries have matched the highest standard for Deep Cycle VRLA batteries on the market. This has allowed us to craft out batteries to ensure they maintain their performance levels in the highest vibration and deepest discharge applications.
Whether you need deep cycling power for your Boat or RV; for your Solar and Wind power generator system; a consistent ride from your Electric Vehicles or Golf Cars; or a long lasting battery pack in your Floor Cleaning machine, Aerial Work Platforms or Pallet Truck, we have a battery that has been tested and proven the best in your Deep Cycle application.
And because it comes in a fully sealed, maintenance-free, corrosion-free package, Fullriver DC Series AGM batteries are an investment in making sure your battery pack enhances the quality of your machines. Fullriver DC Series AGM - The Battery that Makes Your Machine Better.
DC260-12 Specifications
Voltage 12 Volts
Amp-hour Capacity 260@20 Hour Rate
Groupe Size 8D
Total Height 8.82" (224 mm)
Height 8.66" (220 mm)
Width 10.59" (269 mm)
Length 20.51" (521 mm)
Weight 170.6 lbs (77.4 kg
Case Type ABS Plastic - Flame Res Rating UL94-HB
Warranty 7 Years for residential applications; 2 Years for mobile applications
Discover Energy AES 2.92kWh / 48VDC LiFePO4 Solar Stationary Battery
Discover® Advanced Energy System (AES) LiFePO4 Lithium solar batteries offer bankable performance and the lowest cost of energy storage per kWh. AES LiFePO4 Lithium batteries are manufactured with the highest-grade LiFePO4 cells and feature a proprietary high peak surge and transient voltage hardened BMS that delivers superior peak power, lightning fast charge and discharge rates and LYNK Solar Gateway functionality for plug-and-play closed loop integration with the worlds best known off-grid inverters and chargers turning a good system into a great one.
44-48-3000 Specifications:
- Nominal Capacity: 2,920 Wh
- Usable DoD: 100%
- Rated Ah Capacity(1C): 57
- Voltage: 48
- Nominal Voltage: 25.6
- Charge Voltage: 54
- Maximum Voltage: 58.4
- Minimum Voltage: 44.8
- Charge Temperature: Min: 32oF / Max: 113oF
- Discharge Temperature: Min: -4oF / Max: 122oF
- Storage Temperature: Min: 14oF / Max: 86oF
- Maximum Continuous Charge Current: 57 Adc
- Maximum Continuous Discharge Current: 57 Adc
- Maximum Peak Current: 219 Adc
- Dimensions:(L x W x H): 13.0" x 13.3" x 10.1"
- Weight: 88
- Cell Chemistry: LiFePO
- Warranty: 10 years
Fortress Power eFLEX 5.4 kWh LiFePO4 Battery
Fortress Power announces the eFlex 5.4 kWh scalable energy storage battery solution. The unit uses safe and high energy density prismatic Lithium-Iron-Phosphate cells. The battery has a built-in data storage and Wi-Fi for remote monitoring and troubleshooting ability. The smart relay-based Battery Management System (BMS), supports closed-loop communication with various 48V hybrid inverters on the market. Additionally, the BMS monitors and balances the voltage and temperature of each individual cell to maximize reliability and longevity. It has the highest round trip efficiency in the industry at 98%. This unit has wall mounting functionality and fits well into standard server racks for large systems.
High Durability and long-lasting: 10 Year Warranty with the safe and premium prismatic Lithium-Iron-Phosphate cells
Versatile Applications: Expandable from 5.4 kWh to 81 kWh for residential, commercial, railway, military and telecommunications applications
Lowest Cost Per Cycle: High energy throughout with exceptional life span (6000+ cycles) and hight round-trip efficiency (>99%)
Monitor from Anywhere: The battery has a built-in data storage Wi-Fi for remote monitoring and troubleshooting ability
Waterproof and saltwater resistant: The sleek-looking aluminum cabinet has IP65 waterproof rating to prevent salt-water corrosion
Specifications:
- Total Energy: 5.376 kWh
- Nominal Voltage: 51.2(48)V
- Voltage Range: 45-58.4 V
- Max. Charge Current(Continuous): 100 Amp / Recommended Charge Current: 55A
- Max. Discharge Current(Continuous): 100 Amp / Recommended Continuous Discharge Rate: <68A
- Recommend Storage temperature: 32 to 95 F
- Charge temperature: 32 to 113 F
- Capacity: 105 Amp-hour
- Dimension(H x W x D): 7.2" x 17.5" x 21.5"
- Weight: 116 lbs
SimpliPhi Power 2,900 Watt-hour Lithium Ion 48 Volt Battery
The PHI 2.9kWh deep-cycle Lithium Ferro Phosphate (LFP) battery is optimized with proprietary cell architecture, power electronics, BMS and manufacturing methods. It is modular, lightweight and scalable. Provides power security and seamless integration of renewable and traditional sources of energy in conjunction with or independent of the grid: net zero, peak shaving, emergency, back-up portable and mobile.
Specifications:
- Model: PHI 2.9kWh
- Part number: PHI-2.9-48-60
- 48 Volts DC
- Nominal voltage: 51.2
- Capacity: 57 Amp-hours
- Rated Wh capacity at C/2: 2.9kWh
- Max. discharge current: 60 Amps for 10 minutes
- Max. continuous discharge current: 28.5 Amps
- Depth of discharge: up to 100%
- Cycle life: 10,000+
- LFP batteries with proprietary architecture and Battery Management System (BMS)—do not require ventilation, cooling or thermal regulation
- Compatible with all industry standard inverter/charge controllers
- Drop in replacement for lead acid
- LFP is the safest, most environmentally benign Lithium Ion chemistry available—no risk of thermal runaway or fire
- No AC or toxic liquid cooling—negligible parasitic drain—long cycle life
- Non-toxic and non-hazardous recyclable materials
- Approved CA SGIP Advanced Energy Storage (AES) rebate program supplier
- Meets transport safety weight requirements: Less than 35 kg including packaging
- UN 3481, Lithium Ion battery contained in equipment, 9, II
- UL and CE listed, UN/DOT and RoHS compliant components - UL Certified
- Designed and manufactured in California, USA
- Dimensions (W x H x D): 11.25" x 11.0" x 9.5"
- Weight: 61.06 lbs.
Warranty: 10 years
SimpliPhi Power 2,900 Watt-hour Lithium Ion 48 Volt Battery
The PHI 2.9kWh deep-cycle Lithium Ferro Phosphate (LFP) battery is optimized with proprietary cell architecture, power electronics, BMS and manufacturing methods. It is modular, lightweight and scalable. Provides power security and seamless integration of renewable and traditional sources of energy in conjunction with or independent of the grid: net zero, peak shaving, emergency, back-up portable and mobile.
Specifications:
- Model: PHI 2.9kWh
- Part number: PHI-2.9-48-60
- 48 Volts DC
- Nominal voltage: 51.2
- Capacity: 57 Amp-hours
- Rated Wh capacity at C/2: 2.9kWh
- Max. discharge current: 60 Amps for 10 minutes
- Max. continuous discharge current: 28.5 Amps
- Depth of discharge: up to 100%
- Cycle life: 10,000+
- LFP batteries with proprietary architecture and Battery Management System (BMS)—do not require ventilation, cooling or thermal regulation
- Compatible with all industry standard inverter/charge controllers
- Drop in replacement for lead acid
- LFP is the safest, most environmentally benign Lithium Ion chemistry available—no risk of thermal runaway or fire
- No AC or toxic liquid cooling—negligible parasitic drain—long cycle life
- Non-toxic and non-hazardous recyclable materials
- Approved CA SGIP Advanced Energy Storage (AES) rebate program supplier
- Meets transport safety weight requirements: Less than 35 kg including packaging
- UN 3481, Lithium Ion battery contained in equipment, 9, II
- UL and CE listed, UN/DOT and RoHS compliant components - UL Certified
- Designed and manufactured in California, USA
- Dimensions (W x H x D): 11.25" x 11.0" x 9.5"
- Weight: 61.06 lbs.
Warranty: 10 years
SimpliPhi Power 3,800 Watt-hour Lithium Ion 48 Volt Battery with metal case
The PHI 3.8 kWh 60 Amp deep-cycle Lithium Ferro Phosphate (LFP) battery is optimized with proprietary cell architecture, power electronics, BMS and assembly methods. It is modular, light- weight and scalable for installations that range from kWh to MWh. Provides power security and seamless integration of renewable and traditional sources of energy in conjunction with or independent of the grid: net zero, peak shaving, emergency back-up, portable and mobile.
Specifications:
- Model: PHI 3.8kWh
- 48 Volts DC
- Nominal voltage: 51.2
- Capacity: 75 Amp-hours
- Rated Wh capacity at C/2: 3.8 kWh
- Max. discharge current: 60 Amps for 10 minutes
- Max. Continuous discharge current: 37.5 Amps
- Depth of discharge: up to 100%
- Cycle life: 10,000+
- Built-in accessible 80 Amp DC breaker On/Off switch - increases safety and simplifies installations
- 48V LFP batteries with proprietary architecture and Battery Management System (BMS)—do not require ventilation, cooling or thermal regulation
- Compatible with all industry standard inverter/charge controllers
- Drop in replacement for lead acid
- LFP is the safest, most environmentally benign Lithium Ion chemistry available—no risk of thermal runaway or fire
- No AC or toxic liquid cooling—negligible parasitic drain—long cycle life
- Non-toxic and non-hazardous recyclable materials
- Approved CA SGIP Advanced Energy Storage (AES) rebate program supplier
- Meets transport safety weight requirements: Less than 35 kg including packaging
- UN 3481, Lithium Ion battery contained in equipment, 9, II
- UL and CE listed, UN/DOT and RoHS compliant components - UL Certified
- Designed and built in California, USA
- Dimensions: 13.5" x 14.0" x 8.0"
- Weight: 78.24 lbs.
10 year warranty
Primus Wind Power AIR 30 48VDC Wind Turbine
The Primus Wind Power AIR 30 model 1-AR30-10-48 wind generator is for land use only and designed to work best in high wind environments. The body is constructed of permanent mold cast aluminum and the three blades are made of carbon-molded composite. The generator can be used for multiple types of off grid power applications including telecommunications, security systems, cathodic protection, cabins and trailers. It can also be used in conjunction with a solar system to supplement battery charging. The AIR 30 will produce 30 kWh per month with an average wind speed of 13 miles per hour and requires a start up wind speed of 8 mph. It comes with a built-in microprocessor controlled charge controller and the option of using an external load diversion controller. It can also be used with the MidNite Solar Classic with a Clipper unit to maximize energy production. The wind generator cannot be connected directly to a power inverter. It must be used to charge a 48 volt battery bank. Your inverter will get its power from the batteries.
Comes with a 5 year manufacturer's warranty.
| Energy | Approx. 30 kWh/mo at 5.8 m/s (13 mph) |
| Swept Area | 1.07 m2 (11.5 ft2) |
| Rotor Diameter | 1.17 m (46 in) |
| Weight | 5.9 kg (13 lb) |
| Startup Wind Speed | 3.58 m/s (8 mph) |
| Voltage | 48 Volts DC |
| Turbine Controller | Mircoprocessor-based smart controller |
| Body | Permanent mold cast aluminum |
| Blades | (3) Injection-molded composite |
| Alternator | Permanent magnet brushless |
| Overspeed Protection | Electronic torque control |
| Survival Wind Speed | 49.2 m/s (110 mph) |
| Mount | 1.5 in schedule 40 pipe 48 mm (1.9 in) outer diameter |
| Wind Speed Operating Range | 3.6-22 m/s (8-49 mph) |
| Optimum Wind Speed Range | 11-15 m/s (25-32 mph) |
Primus Wind Power AIR 40 48VDC Wind Turbine
The Primus Wind Power AIR 40 model 1-AR40-10-48 wind generator is for land use only and designed to work in medium to high wind environments. The body is constructed of permanent mold cast aluminum and the three blades are made of carbon-molded composite. The generator can be used for multiple types of off grid power applications including telecommunications, security systems, cathodic protection, cabins and trailers. It can also be used in conjunction with a solar system to supplement battery charging. The AIR 40 will produce 40 kWh per month with an average wind speed of 13 miles per hour and requires a start up wind speed of 7 mph. It comes with a built-in microprocessor controlled charge controller and the option of using an external load diversion controller. It can also be used with the MidNite Solar Classic with a Clipper unit to maximize energy production. The wind generator cannot be connected directly to a power inverter. It must be used to charge a 48 volt battery bank. Your inverter will get its power from the batteries.
Comes with a 5 year manufacturer's warranty.
| Energy | Approx. 40 kWh/mo at 5.8 m/s (13 mph) |
| Swept Area | 1.07 m2 (11.5 ft2) |
| Rotor Diameter | 1.17 m (46 in) |
| Weight | 5.9 kg (13 lb) |
| Startup Wind Speed | 3.1 m/s (7 mph) |
| Voltage | 48 Volts DC |
| Turbine Controller | Mircoprocessor-based smart controller |
| Body | Permanent mold cast aluminum |
| Blades | (3) Injection-molded composite |
| Alternator | Permanent magnet brushless |
| Overspeed Protection | Electronic torque control |
| Survival Wind Speed | 49.2 m/s (110 mph) |
| Mount | 1.5 in schedule 40 pipe 48 mm (1.9 in) outer diameter |
| Wind Speed Operating Range | 3.1-22 m/s (7-49 mph) |
| Optimum Wind Speed Range | 4.5-22 m/s (10-49 mph) |
Tamarack UNI-TP/08 Top of Pole Mount
Tamarack top of pole mount is a heavy duty mounting system ideal for single pole, multi panel arrays with a tilt range of 15 - 65 degrees. Mounted above either 4 or 6 poles, this configuration supports most manufacturer modules. Our Top of Pole mounts are manufactured using powder coated steel and heavy-duty corrosion-resistant 5052-H32 aluminum. The UNI-TP/08 universal top-of-pole mount is a very sturdy and straightforward pole mounting solution for small area solar photo voltaic (PV) needs. With its user-adjustable angle settings, it can support installations in a wide range of locations.
The UNI-TP/08 supports:
- Up to eight PV panels (four panels in each of the two channels, with a combined width of up to 90 inches per channel).
- A pole diameter of 6.0 inches (requires a properly anchored schedule 40 pipe